Table of Contents
Advertisement
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with PROGRAM.
1
To select your play mode, press MODE
(SHUFFLE or REPEAT on the remote
control) before or during playback until the
display shows the desired function.
➜
appears if the shuffle playback is
activated and disappears if deactivated.
➜
If
appears, it indicates to play the
current track repeatedly.
➜
If
ALL is displayed, it indicates to play
all tracks in the whole disc repeatedly.
➜
For an MP3 CD/WMA, if both
appear on the display panel, it indicates to play
the current album repeatedly.
2
Press ÉÅ to start playback if in the STOP
position.
➜
If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the MODE
(SHUFFLE or REPEAT on the remote
control) until
or
displayed.
●
You can also press 9 to stop playback and
cancel your play mode.
Note:
– The Repeat and Shuffle functions cannot be
activated simultaneously.
pg001-034_BTM630_37-Eng
CD/MP3-CD/WMA Operation
Programming track numbers
Program in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
1
Press PROG to enter the programming mode.
➜
2
Press
control) to select your desired track number.
●
For an MP3 CD, Press ALBUM • PRESET +/-
(or ¡ / ™ on the remote control) to select a
desired album number.
3
Press PROG to confirm the track number to be
stored.
➜
and ALB
program number to be stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜
program more than 40 tracks.
5
Press 9 to finish programming.
➜
6
To start playback of your disc program, press
ÉÅ directly.
is no longer
Erasing the program
You can erase the program by:
●
pressing 9 once in the STOP mode;
●
pressing 9 twice during playback;
➜
●
ejecting the current disc;
19
A track number flashes.
(or ¡ / ™ on the remote
/
S
T
PR X displays, in which X denotes the next
PROGRAM FULL appears if you attempt to
PROG displays on the screen.
PROG disappears.
2007.6.14, 17:15
19
Advertisement
Table of Contents
