Table of Contents
Advertisement
Tape Operation/Recording
CD/USB Synchronised start
recording
1
Select CD or USB source.
●
Press TITLE-/+í/ë to select the desired
track, then press RECORD to start recording.
●
You can programme the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press RECORD to start recording.
➜
The disc will start playback automatically.
To stop recording
●
Press STOP Ç.
➜
Recording and disc playback will stop
simultaneously.
24
Dubbing tapes
1
Load the prerecorded tape in tape deck 1.
●
You can set the tape to the desired passage
where recording will start.
2
Press RECORD.
➜
Playing and recording will start simultaneously.
➜
"DUB" is displayed.
●
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
●
Press STOP Ç.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
Hide quick links:
Advertisement
Table of Contents
