Adding A New Contact To Your Personal List - Sanyo SCP-4920 User Manual

Adding a New Contact to Your Personal List

You can store a total of 200 entries in the Personal Lists.
To add a new Push to Talk contact:
1. Press PTT (right softkey) or press
List.
2. Press Go to (left softkey), highlight Personal List, and press
3. Highlight <Add Contact> and press
– or –
Highlight an entry and press Options (right softkey). Then
highlight Add Contact and press
If the Personal List is full, you will see a warning message on
the display. (Your phone can store a total of 200 Push to Talk
Personal List or Personal Group contacts.)
4.
Enter a name for the new contact and press
name you will see when calling or receiving a call from the
contact.)
5. Highlight the PTT Number field, enter the contact's 10-digit Push
to Talk number (their phone number) and press
6. Press Save (left softkey) to save the new contact to your
Personal List.
Tip:
You are not allowed to use the following symbols during step 4: ":", "@", ";",
"/", "*", ")", and "(".
to access the Push to Talk
.
.
. (This is the
.
.
110