Table of Contents
Advertisement
Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new Ready Link contact:
1.
Press R-Link (left softkey) or press
List.
2.
Press Go to (left softkey), highlight Personal List, and press
3.
Highlight <Add Contact> and press
– or –
Highlight an entry and press Options (right softkey). Then
highlight Add Contact and press
4.
Enter a name for the new contact and press
name you will see when calling or receiving a call from the
contact.)
5.
Highlight the R-Link Number field, enter the contact's 10-digit
Ready Link number (their wireless phone number) and
press
6.
Press Save (left softkey) to save the new contact to your
Personal List.
Tip:
You are not allowed to use the following symbols during step 4: ":", "@", ";",
"/", "*", ")", and "(".
Section 2J: Using Ready Link
If the Personal List is full, you will see a warning message on
the display. (Your phone can store a total of 200 Ready Link
Personal List or Personal Group contacts.)
.
to access the Ready Link
.
.
. (This is the
.
140
Advertisement
Table of Contents
