Adjusting The Phone's Volume Settings - Sanyo SCP-4920 User Manual

Adjusting the Phone's Volume Settings

To adjust the ringer, start-up/power-off, or key beep volume:
1.
Press
2. Select Settings and press
3. Select Sounds and press
4. Select Ringer/Key Vol. and press
5.
Select the item you wish to change and press
Ringer Volume to adjust Ringer tone volume.
Start-up/Pw-off to adjust Start-up/Power-off tone volume.
Key Beep to adjust Key Beep tone volume.
6.
Adjust a volume level by pressing the navigation key up or down
and press
Ringer Off to set the Voice Call ringer volume to off. (Only
appears in Ringer Volume setting.)
Silence All to set all the ringer volumes settings to off.
(Only appears in Ringer Volume setting. See "Silence All" on
page xx.)
To adjust the earpiece or speaker volume:
1.
Follow steps 1-3 above.
2. Select Receiver Vol. and press
3. Select either Earpiece or Speaker and press
4.
Adjust a volume level by pressing the navigation key up or down
and press
Tip:
You can adjust the ringer volume in standby mode (or the earpiece volume
during a call) by using the Side Volume keys up or down.
to access the main menu.
.
.
.
.
.
.
.
.
27