Making A Push To Talk Call (Group Call) - Sanyo SCP-4920 User Manual

Making a Push to Talk Call (Group Call)

You can make a Push to Talk call to all members in a Group entry,
which you have in your Push to Talk List. You can communicate with
up to five members at a time.
To place a Push to Talk Group call:
1. Press PTT (right softkey) or press
List.
2. Press Go to (left softkey), highlight the list from which you want
to make a Group call (Company Groups or Personal Groups), and
press
3.
Highlight the group you want to call, and press and hold
place the call and take the floor. (You will see PTT calling... and
Connecting... followed by "You have floor." Continue with the
Push to Talk call as described above.)
To display a group member's details, press
your desired group member, then press View (left softkey)
during step 3 above. Press
the member.
If one of the group members takes the floor, you will see the
member's name and Push to Talk number on the display.
The phone beeps if you press the Push to Talk/Recorder
button when another contact has the floor.
4.
When the call is finished, press
Tip:
You can also make a Group Call after checking the group member. Press
to display group members, highlight
during step 3 above.
Tip:
Press the navigation key right or left to move your cursor to
Push to Talk list.
.
to access the Push to Talk
to make a Push to Talk call to
.
and press and hold
<Call Group>
to
, highlight
in the
Redial
103