Making A Push 2 Talk Call (Group Call) - Sanyo SCP-2300 User Manual

Making a Push 2 Talk Call (Group Call)

You can make a Push 2 Talk call to all members in a Group entry,
which you have in your Push 2 Talk List. You can communicate with
up to five members at a time.
To place a Push 2 Talk Group call:
1. Press P2T (left softkey) or press
2. Press Go to (left softkey), highlight the list from which you want
to make a Group call (Personal Groups or Outgoing) and press
3.
Scroll to the group you want to call, and press and hold
place the call and take the floor. (You will see P2T calling... and
Connecting... followed by "You have floor." Continue with the
Push 2 Talk call as described on the previous page.)
4.
When the call is finished, press
Tip:
The phone beeps if you press
Tip:
You can also make a Group Call after checking the group member. Press
to display group members, select
step 3 above.
Tip:
To redial your last Push 2 Talk call, select
from the Push 2 Talk List.
94
To make a Push 2 Talk call to a group member, select your
desired group, press
and press and hold
If one of the group members takes the floor, you will see the
member's name and Push 2 Talk number on the display.
.
, select your desired group member,
.
.
when another contact has the floor.
and press and hold
<Call Group>
Redial
and press and hold
.
to
during