ZyXEL Communications X6004 Quick Start Manual page 2

Introduction
An IP PBX is a telephone exchange device located at your company which sets up and
controls calls. This document covers configuring the X6004 for internal calls and outbound
calls to either the PSTN (Public Switched Telephone Network) or your ITSP (Internet
Telephony Service Provider).
This Quick Start Guide consists of the following sections:
Hardware
- page 3
Configuration
- page 8
1 Installation
2 Extension Slots
connecting analog phones and direct connections to the PSTN or a
traditional PBX.
3 Hardware Connections.
4 Web Configurator Login
5 Network Setup Wizard
6 Setting up Extensions
extensions for internal communications. An authority group manages
telephone extensions.
7 Create an Outbound Rule
authority group to them. These rules specify which outbound trunk should
be used for outgoing calls.
8 Outbound Groups (External Links)
in outbound rules.
9 IP Phone Registration and Making Calls
telephone calls.
ENGLISH
ENGLISH
Internet
- install a hard drive and voice interface cards for
- create an authority group and create
- create outbound rules and associate an
2
ITSP
PSTN
- configure the external links used
- register IP phones and make