Section 4 - Maintenance
2.
Observe the fluid level. The fluid level must be between the "MIN" and "MAX" lines on the reservoir.
a
a -
Reservoir
b -
"MIN" and "MAX" lines
3.
Fill as necessary with the specified fluid. See Filling.
Tube Ref No.
Power Trim and Steering Fluid
114
Filling
1.
If the fluid level is below the "MIN" line, the specified fluid must be added.
2.
Remove the fill cap from the reservoir.
NOTE: The fill cap is vented.
a
Page 48
Description
b
Where Used
Power trim pump
b
7701
7876
Power trim pump reservoir shows the
fluid level is below "MIN" line
a -
Fill cap assembly
b -
Fill cap installed
90-8M0113987
DECEMBER 2015
eng
Part No.
92-858074K01