4.2 Air Filter; Removal; Inspection - Mercury 2.8 Diesel Operation & Maintenance Manual

Sterndrive models
Hide thumbs Also See for 2.8 Diesel:
Table of Contents

Advertisement

4.2 Air Filter

Removal

1.
Loosen the clamp and remove the oil separator vent hose.
2.
Loosen the clamp and remove the air filter housing from the turbocharger inlet.
b
a
d
3.
Remove the air filter element from the air filter housing
a

Inspection

1.
The air filter cannot be cleaned. Replace the air filter if it is dirty or contaminated.
2.
Replace the air filter if the foam element is deteriorated or torn.
3.
Replace the air filter at the recommended interval. See Maintenance Schedules for the replacement interval under normal
conditions.
90-8M0113987
DECEMBER 2015
eng
a -
Oil separator vent hose
c
b -
Air filter housing
c -
Turbocharger
d -
Clamp
d
25881
a -
Air filter housing
b -
Air filter element
b
25893
Section 4 - Maintenance
Page 53

Advertisement

Table of Contents
loading

This manual is also suitable for:

4.2 diesel

Table of Contents