Mercury 2.8 Diesel Operation & Maintenance Manual page 82

Section 4 - Maintenance
Description
Alpha sterndrive
gearcase anodic plate
Alpha sterndrive
gimbal housing anode
Bravo sterndrive
gearcase anode plate
Alpha and Bravo sterndrive
ventilation plate anode
Alpha and Bravo sterndrive
trim cylinder anodes
Alpha and Bravo sterndrive
bearing carrier anode
MerCathode System
Anode kit (if equipped)
In addition to the corrosion protection devices, take the following steps to inhibit corrosion:
Page 74
Location
Mounted on the underside of the lower gearcase.
Mounted on the underside of the gimbal housing.
Mounted on the underside of the lower gearcase.
Mounted on the front of the gearcase.
Mounted on each of the trim cylinders.
Located in front of the propeller, between the front
side of the propeller and the gear housing.
The MerCathode electrode, if equipped, is mounted
to the underside of the gimbal housing. The
MerCathode controller is mounted on the engine or
on the boat transom. The controller harness
connects to the electrode harness.
Mounted to the boat transom.
Figure
20342
20343
20340
20341
90-8M0113987 DECEMBER 2015
eng
22405
53380
20336
20338