The Settings In Detail; Time Of Day And Date; Operator Section; Operation And Display - Siemens Albatros2 RVS46 User Manual

Zone controler
Hide thumbs Also See for Albatros2 RVS46:
Table of Contents

Advertisement

Summer- / wintertime
changeover

Operation and display

Info
Operation lock
Programming lock
52/100
Siemens Schweiz AG
HVAC Products
6

The settings in detail

6.1 Time of day and date

The controller has a yearly clock with time of day, weekday and date. To ensure that
the controller works properly, both the time of day and date must be correctly set.
Line no.
Operating line
1
Hours/minutes
2
Day/month
3
Year
5
Start of summertime
6
End of summertime
The dates set for the changeover from wintertime to summertime, and vice versa,
ensure that on the first Sunday after the set date the time of day will change from 02:00
(wintertime) to 03:00 (summertime), and from 03:00 (summertime) to 02:00
(wintertime).

6.2 Operator section

Line no.
Operating line
20
Language
22
Info
Temporarily
Permanently
26
Operation lock
27
Programming lock
40
Used as
Room unit 1
Room unit 2
Operator unit
Service unit
Temporarily:
After pressing the Info button, a change to the "predefined" basic display
is made after a maximum of 8 minutes or by pressing the operating
mode button (with the QAA78... only 2 minutes) .
Continuously: After pressing the Info button, a change back to the "new" basic display
is made after a maximum of 8 minutes. The info value selected last will
be adopted by the new basic display.
This setting is not possible with the QAA78...
When operation lock is activated, the following operating elements can no longer be
adjusted:
Heating circuit operating mode, DHW operating mode, room Comfort setpoint (setting
knob), and occupancy button.
When programming lock is activated, parameter values can still be displayed, but can
no longer be changed.
• Temporary deactivation of programming lock.
Within the programming level, the programming lock can temporarily be overridden.
To do this, press the OK and ESC buttons simultaneously for 3 seconds. Temporary
deactivation of the programming lock is maintained until programming is quit
User Manual
The settings in detail
CE1U2353en
22. November 2006

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents