Table of Contents
Advertisement
Operating elements
Display choices
Display
Configuration
Settings
Used as
Direct adjustment
Siemens Schweiz AG
HVAC Products
5.2 QAA55...
5.2.1
operation
Heating to the Comfort setpoint
Heating to the Reduced setpoint
Display showing all available segments.
5.2.2
Programming
A long press on the occupancy button enables the service level to be accessed.
ru = 1 (factory setting)
ru = 2
P1 = 1 (factory setting)
P1 = 2
User Manual
Handling
Selection of space
Adjustment of room Comfort
setpoint
Presence button
Burner in operation (only oil / gas burner)
Error messages
The room unit is addressed as room unit 1
The room unit is addressed as room unit 1
Automatic storage:
A setpoint readjustment with the knob is adopted
either by pressing the operating mode button or
without any further confirmation (timeout).
Storage with confirmation:
A setpoint readjustment with the knob is adopted
only after pressing the operating mode button.
51/100
CE1U2353en
22. November 2006
Hide quick links:
Advertisement
Table of Contents
