Processor - NEC Express5800/T120d User Manual
Express server express5800 series
Hide thumbs
Also See for Express5800/T120d:
- Hardware specificftion (2 pages) ,
- Configuration manual (63 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.9
Processor
You can configure the multi-processor system by adding an optional processor.
CPU#2
• You must avoid static electricity to work with the procedure below. For details,
Important
refer to Chapter 2 (1.2 Anti-static Measures).
• Make sure to use the processor authorized by NEC. Installing a third-party
processor may cause a failure of the processor as well as the motherboard.
Repair of the server due to failures or damage resulted from installing such a
processor will be charged.
• Two CPUs must have the same clock frequency. Make sure of the CPU type
appropriate to the server.
• If you install an additional CPU, you need to change DIMM installation location.
Refer to Chapter 2 (1.10 DIMM).
Tips
After adding the processor, Windows may record the event log to System catogory of
Event Viewer, but it is no problem for operation.
Express5800/T120d User's Guide
1. Installing Internal Optional Devices
CPU#1
(Primary CPU)
55
Advertisement
Table of Contents
