Replacing/Removing Failed Hot-Plug Redundant Fan Unit - NEC Express5800/T120d User Manual
Express server express5800 series
Hide thumbs
Also See for Express5800/T120d:
- Hardware specificftion (2 pages) ,
- Configuration manual (63 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.17.4 Replacing/removing failed hot-plug redundant fan unit
(1)
Replacement
Replace the hot-plug redundant fan unit only when it fails. The fan unit can be replaced while the system is
powered on and running.
1.
Identify the failed fan unit using management tool such as EXPRESSSCOPE Engine 3.
Indication of management tool of EXPRESSSCOPE Engine 3 associates actual fan unit is as shown
below.
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use.
• Pay attention to electric hazard.
Important
Do not remove the fan unit that works normally.
Express5800/T120d User's Guide
1. Installing Internal Optional Devices
CAUTION
107
Advertisement
Table of Contents
