2 INSTALLING DRIVERS
Installing the drivers on Windows XP / Windows Server 2003 / Windows Server 2003 R2
Connect this equipment to the computer using a USB cable, and then start the
1
computer.
Do not connect or disconnect the USB cable when starting up the computer.
Insert the driver Client Utilities/User Documentation DVD into the computer.
2
3
Turn on the equipment.
The Found New Hardware Wizard dialog box appears.
If it does not appear, turn off this equipment, and then wait approximately 10 seconds before turning it on again.
If you turn this equipment on immediately after turning it off, it may not function correctly.
If "Windows Update" appears, select [No].
4
Click "No, not this time" and click [Next].
5
Click "Install from a list or specific location (Advanced)" and click [Next].
20
Installing Drivers