Table of Contents
Advertisement
Step 8.
Return the retention latch to the locked position by pulling it away from the system board.
If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation"
on page 83.
Completing the installation
Use this information to complete the installation.
To complete the installation, complete the following steps:
Step 1.
If you removed the fan assembly, reinstall it (see "Installing the fan assembly" on page 83.
Step 2.
If you removed the air baffle, reinstall it (see "Replacing the air baffle" on page 190).
Step 3.
If you removed the left sidecover, replace it (see "Replacing the left-side cover" on page 86).
Step 4.
Reconnect the cables and power cords (see "Connecting the cables" on page 86).
Step 5.
Update the server configuration (see "Updating the server configuration" on page 88).
Step 6.
Install the server in the rack cabinet (see the Tower to Rack Installation Instructions that is included
in the separately ordered rack package) if necessary.
Step 7.
Slide the server back into the rack, if necessary.
Step 8.
Start the server. Confirm that is starts correctly and recognizes the newly installed devices, and
make sure that no error LEDs are lit.
Step 9.
Complete the additional steps in "Instructions for Business Partners" on page 25.
Installing the fan assembly
Use this information to install the fan assembly.
To install the fan assembly, complete the following steps:
Step 1.
Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 34.
Step 2.
Turn off the server (see "Turning off the server" on page 24) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
Step 3.
Carefully turn the server on its side so that it is lying flat, with the cover facing up.
Attention: Do not allow the server to fall over.
Step 4.
Unlock and remove the left-side cover (see "Removing the left-side cover" on page 37).
.
Chapter 2
Installing optional devices
83
Advertisement
Table of Contents
Troubleshooting
