Turning On Computer Power; Completing The Software Installation - Lenovo ThinkCentre M90p Safety And Warranty Manual

Note: For more information about connectors, refer to the Access Help information
system. See "Access Help" on page 26 for instructions on how to open the
information system.

Turning on computer power

Turn on the monitor and other external devices first, and then turn on the computer.
When the power-on self-test (POST) is finished, the logo window closes. If your
computer has preinstalled software, the software installation program starts.

Completing the software installation

Note: This section applies only to computer models that have an internal hard
disk drive and preinstalled software from Lenovo.
Important: Read the license agreements carefully before using the programs on
this computer. These agreements detail your rights, obligations, and warranties
for the software on this computer. By using these programs, you accept the terms
of the agreements. If you do not accept the agreements, do not use the programs.
Instead, promptly return the entire computer for a full refund.
The first time you start your computer, follow the instructions on the screen to
complete the software installation. If you do not complete the software installation
the first time you start your computer, unpredictable results might occur. When
the installation is complete, refer to the Access Help information system to learn
more about your computer. See "Access Help" on page 26 for instructions on
how to open this information system.
® ®
Note: Some models might have a multilingual version of Microsoft Windows
operating system preinstalled. If your computer has the multilingual version, you
will be prompted to choose a language during the installation process. After
installation, the language version can be changed through the Windows Control
Panel.
22
ThinkCentre Safety and Warranty Guide