Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Connecting the FWG114P Wireless Firewall/Print Server
This section provides instructions for connecting the FWG114P Wireless Firewall/Print Server.
Also, the Resource CD for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
(SW-10023-01) included with your router contains an animated Installation Assistant to help you
through this procedure.
How to Connect the FWG114P
There are three steps to connecting your router:
Connect the router to your network
1.
Log in to the router
2.
Connect to the Internet
3.
Follow the steps below to connect your router to your network. You can also refer to the Resource
CD included with your router which contains an animated Installation Assistant to help you
through this procedure.
1. Connect the wireless firewall/print server to your network.
Turn off your computer and broadband modem.
a.
Disconnect the Ethernet cable (A) from your computer which connects to your broadband
b.
modem.
A
Figure 3-1: Disconnect the broadband modem
3-4
Connecting the FWG114P to the Internet
M-10177-01