Motion - Vista VIPER HDA User Manual

4.6.3

Motion

Motion > Setup
No. Name
1 CH
2 Use
3 Area
4 Sens.
5 Beep
6 Alarm
7 Group Rec.
8 Noti.
9 Preset
10 Copy to Motion
Setup
Placing your mouse on Alarm, Group Rec, Noti. or Preset and clicking editing
Note icon(
Event : Motion screen, see section "4.6.2 Alarm In > Setup in Alarm In."
VIPER-HAD
manual V1.0
Figure 4-39 Event > Motion > Setup
Table 4-40 Event > Motion > Setup Item and Description
Display channels.
Select/deselect whether to use motion function in the channel.
Display the motion area.
Select the sense level of the motion sensor (Level 1~10).
Select the duration of the buzzer (null, 5 sec, 10 sec, 20 sec, 30 sec, 1
min, 10 min, 30 min, and 1 hour).
Set alarm output.
Select the camera to record simultaneously.
Set email notices.
Set preset of PTZ camera.
Copy motion set value to other channels. For more information about set
value copy, see section "4.5.2 Stream > Main Stream in Stream."
) in right corner displays Event : Alarm screen. For more information about
Function
63