Alarm In - Vista VIPER HDA User Manual

4.6.2

Alarm In

Alarm In > Setup
To set actions required on a hard wired alarm input.
No. Name
1 Sensor
2 Use
3 Type
4 Assign
5 Beep
6 Alarm
7 Group Rec.
8 Noti.
9 Preset
Copy to Alarm
10
Setup
VIPER-HAD
manual V1.0
Figure 4-36 Event > Alarm In > Setup
Table 4-37 Event > Alarm In > Setup Item and Description
Displays the sensor numbers.
Select/deselect whether to use this alarm input.
Select sensor types (N.O, N.C).
Select camera channels to designate a sensor (CH 1~4/8/16, immediate
recording).
Select the time duration of the buzzer (null, 5 sec, 10 sec, 20 sec, 30 sec,
1 min, 10 min, 30 min, and 1 hour).
Set alarm output.
Select the camera to record simultaneously.
Set email notices.
Set preset of PTZ camera.
Copy alarm set value to other channels. For more information about set
value copy, see section "4.5.2 Stream > Main Stream in Stream."
Function
60