2.1
Connection of exterior devices
How to connect each port to rear section of the unit:
1 Place the unit on a stable flat surface.
2 Ensure there is enough space around the device to ensure adequate ventilation, and avoiding any
damage to connection leads
3 Ensure unit is unplugged before connecting external devices
Make sure to withdraw the mains plug before installing the device.
Warning
4 Connect the cameras an any audio devices
Note
The DVR will automatically detect any connected camera.
5 If required connect the audio output port to a speaker.
6 Connect monitor, options are HDMI, VGA and CVBS spot output
7 Connect a network port.
8 Connect an alarm and RS485 devices.
VIPER-HAD
manual V1.0
6