2.3.3
Network
1 Set each item in Network setting screen.
WAN Port: Select whether to use static IP or dynamic IP.
IP Address, Subnet Mask, Gateway, DNS, and Port: As for dynamic IP, enter information in each
space.
2 Press Save button to save set value.
3 Press Next to move to the next set up stage
2.3.4
Record
This is used to quickly set the desired record parameters to achieve the approximate recording time and
quality, The settings may need to be adjusted to fine tune the system
1 Set each item in Record setting screen.
User can input desired recording options and HDD size.
1 Press Save button to save set value.
2 Press Next to move to the next set up phase.
VIPER-HAD
manual V1.0
11