Stream - Vista VIPER HDA User Manual

4.5.2

Stream

Used to set the image resolution when event occurs across channels or general recording is in process.
Stream > Main Stream
To set the image quality and resolution of Main Stream
No. Name
1 CH
2 Resolution
3 Continuous
4 Event
5 Pre-Alarm
6 Post-Alarm
7 Copy Stream
Setup
VIPER-HAD
manual V1.0
Figure 4-30 RECORD > Stream > Main Stream
Table 4-31 RECORD > Stream > Main Stream Item and Description
Display channels.
Set the resolution of video clips (1080P, 720P, and 960H).
Select recording FPS and image quality in consecutive recording.

Frame Rate: recording FPS selection (1-30)

Quality: recording image quality selection (Level 1-8)
Select recording FPS and image quality in event recording.

Frame Rate: recording FPS selection (1-30).

Quality: recording image quality selection (Level 1-8).
Start recording before set time, if event occurs (null, 1 sec, 2 sec, 3 sec, 4
sec, and 5 sec).
Recording after set time until event ends (null, 5 sec, 10 sec, 30 sec, 1 min,
5 min, and 10 min).
Copy main recording image set value to other channels.
Function
54