Ptz > Ptz - Vista VIPER HDA User Manual

4.4.3 PTZ > PTZ
To use PTZ Function of the device, users need to match ID, protocol, and speed with each camera.
No. Name
1 Copy PTZ Setup
2 CH
3 ID
4 Protocol
5 Speed

For more information about camera ID, protocol information, and details, see
Instruction of relevant PTZ camera.
Note
VIPER-HAD
manual V1.0
Figure 4-25 DEVICE > PTZ > PTZ
Table 4-25 DEVICE > PTZ > PTZ Item and Description
Apply setting history to all or selected channels in the same way.
Display channels.
Used for RS485 protocols only (1-255). Not relevant for up the coax
protocols
Select protocol of camera connected to relevant channels.
Select pan-tilt of camera connected to relevant channels (1-5).
Function
47