Arc452A21 - Daikin CTXG09QVJUW Service Manual

ARC452A21

3. ARC452A21

Signal transmitter
Receiver
• To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
• Do not drop the remote controller. Do
not get it wet.
• The maximum distance for
communication is approximately 23 ft.
(7 m).
FAN setting button
• Selects the airflow rate setting
every time you press this button.
Auto Indoor unit quiet
High Middle high
• In indoor unit quiet operation,
operation sound becomes weak.
(The airflow rate also decreases.)
• In DRY operation, the airflow rate
setting is not available.
Reference Refer to the following pages for details.
1 POWERFUL operation ..........................................................................................................P.54
102
Low
Middle low
Middle
< ARC452A21 >
SiUS121630EA
Display (LCD)
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
TEMPERATURE
adjustment buttons
• Changes the temperature setting.
18 ~ 30 °C
: AUTO
(64 ~ 86 °F)
Not available
: DRY
18 ~ 32 °C
: COOL
(64 ~ 90 °F)
10 ~ 30 °C
: HEAT
(50 ~ 86 °F)
Not available
: FAN
ON/OFF button
• Press this button once to
start operation.
Press once again to stop it.
1
POWERFUL button
• Starts POWERFUL operation.
Remote Controller
(R24595)