Replacing The Waste Ink Bottle; Disposal Of Used Consumables; Disposal - Epson SureColor SC-S70600 series Operator's Manual

EPSON SC-S70600 series/SC-S50600 series
c
Important:
If you replace the waste ink bottle before being
prompted by a message, always clear the waste ink
counter. Otherwise, the replacement interval for
the waste ink bottle will no longer be notified
correctly from the next message.

Replacing the Waste Ink Bottle

Follow the procedure below to replace the parts.
Before starting this procedure, be sure to read the
following:
"Precautions Regarding Maintenance" on page 29
U
A
Remove the waste ink bottle from the waste ink
bottle holder.
Operator's Guide
Maintenance
B
Insert the waste ink tube into the mouth of the
new waste ink bottle and place the waste ink
bottle in the holder.
Tightly seal the lid on the used waste ink bottle.
c
C
Press the Z button.
D
Check again to confirm that a new waste ink
bottle has been installed correctly. Press the Z
button to reset the waste ink counter.
c
Disposal of used waste ink bottles U
on page 46
Disposal of used
consumables

Disposal

Used cleaning sticks, dirty ink cleaner, waste ink bottles,
wipers, wiper cleaners, flushing pads and post-printing
media are industrial waste.
Dispose of items according to local laws and regulations.
For example, contract a industrial waste disposal
company for disposal. In such cases, submit the "Safety
data sheet" to the industrial waste disposal company.
You can download it at your local Epson Web site.
46
Important:
You will need the lid for the waste ink bottle
when disposing of waste ink. Keep the lid in a
safe place; do not throw it out.
Important:
Be sure to confirm that the waste ink tube is
inserted in the mouth of the waste ink bottle.
Ink will spill onto the surrounding area if the
tube is not inserted in the bottle.
"Disposal"