Epson SureColor SC-S70600 series Operator's Manual page 34

EPSON SC-S70600 series/SC-S50600 series
F
Dampen a new clean-room wiper with the ink
cleaner, then wipe away any dust and dirt on the
front, back, and sides of the wiper blade.
G
Wipe away ink stains and so on from the print
head surface by moving the cleaning wiper from
the inside toward you once.
Operator's Guide
Maintenance
c
Before cleaning
After cleaning
The following shows that dried and adhered ink,
lint, and dust are cleanly removed.
If any ink, lint, or dust remain, repeat steps 6 and
7.
32
Important:
Do not move the cleaning wiper back and
forth.
Otherwise, the print head may be damaged.