Ricoh C2828 Operating Instructions Manual page 94

3. Adding Paper
• When printing on OHP transparencies, press [Bypass], and the [ ] key, and then select the paper
size.
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly,
or a misfeed might occur. Use A4 or 8
details, see Copy and Document Server Reference
• When you use OHP transparencies, fan them for each use.
• Flatten out curled sheets before loading them.
• We recommend that you use a 4000ANSI lumen or brighter overhead projector to project OHP
3
transparencies.
• If multiple sheet feeding occurs, load sheets one by one.
• When you load label paper, set the paper direction to .
• To print on envelopes from the bypass tray: select System Settings, [Tray Paper Settings], and then,
for each tray's [Paper Type], be sure to set [Paper Type] to [Envelope], and [Paper Thickness] to [Thick
Paper 2].
• To print on coated paper from the bypass tray, Tray 1, 2, 3, 4, Tray 3 (LCT), or the large capacity
tray (LCT): select System Settings, [Tray Paper Settings], and then, for each tray's [Paper Type] be
sure to set [Paper Type] to [Coated Paper], and [Paper Thickness] to [Thick Paper 1].
• To print on high-gloss coated paper from the bypass tray, Tray 1, 2, 3, 4, Tray 3 (LCT), or the large
capacity tray (LCT): select System Settings, [Tray Paper Settings], and then, for each tray's [Paper
Type], be sure to set [Paper Type] to [Coated Paper: Gloss].
• Before loading coated or glossy sheets, be sure to fan them thoroughly. If sheets feed in together,
become jammed, or produce strange noises when delivered, load them one by one from the bypass
tray.
• When copying or printing onto letterhead paper, the paper placing orientation is different depends
on which function you are using. See "Orientation-fixed paper or two-sided paper".
• If you load paper of the same size in two or more trays, the machine automatically shifts to the other
tray when the first tray in use runs out of paper. This function is called Auto Tray Switching. (However,
if the paper type of one tray is recycled or special paper, the settings of the other trays must be the
same for the Auto Tray Switching function to work.) This saves interrupting a copy run to replenish
paper when making a large number of copies. You can set the paper type of the paper trays under
Paper Type: Tray 1-4, and Paper Type: LCT. See "System Settings", Network and System Settings
Guide . For the setting procedure of the Auto Tray Switching function, see "Copier/Document
Server Features", Copy and Document Server Reference
• When copying or printing onto prepunched paper, the copy/print speed is slower than usual.
• The paper types you can select in System Settings are only general classifications. Copy quality for
every kind of paper in a classification is not guaranteed. See "Unusable Paper" for more information.
• p.77 "Loading Paper"
92
1
/ × 11 size transparencies, and specify their size. For
2
, and Printer Reference
.
.
Draft 2008/06/09