Table of Contents
Advertisement
C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button
Description
Operation
LCD screen lamp turns on for
Press and hold for 1 second
(1 second)
5 seconds.
1 melody sound to confirm enters.
Press and hold for 3 seconds
(3 seconds)
Timer Programming Mode.
2-melody sounds to confirm enter.
Press and hold for 5 seconds
(5 seconds)
Power Save Mode
1 melody sound to confirm enters
Clear the Flash Icon and
-
-
Melody Sound on the LCD
Press within 3 seconds
Screen Transmitter
Press within 3 seconds and Hold
( )
Button Lock
enable /
-
(2-second)
button for 2 seconds
disable
(
)
Press within 3 seconds and Hold
-
Melody / Vibration
(2-second)
button for 2 seconds
Mode
Program Count Down Timer
Press within 3 seconds cycling
*leave the buttons starting count
-
( )
(2-second)
(10-Minute / 20M / 30 M
down then
flashes
/1Hour /1.5H / 2.0H)
Enable / Disable Bi Sound (Bi)
Press within 3 seconds and Hold
-
(2-second)
While Pressing Button
button for 2 seconds
1. Screen Lamp ON:
Press and hold the
button one second, one melody will
sound and the LCD screen lamp will turn on for 5 seconds.
2. Power Save Mode:
While in the power save mode, the
LCD remote transmitter uses "0" current to save the battery
power.
Entry: Press & hold the
button for 5 seconds, one
melody will sound and the
icon on the LCD screen
indicates entry of the "power save mode".
Exit: Press any button of the LCD remote transmitter to
exit the "Power Save Mode".
3. Clear the Flash Icon and Melody Sound:
Pressing the
button 3 times
within 3 seconds will clear the flash icon and the melody sound on the LCD screen
transmitter.
4. Stop The Trigger Melody Sound:
While triggering the alarm the LCD screen will
alert the user through a melody sound and a flashing trigger icon. Press any button on
the LCD remote transmitter to stop melody sound only.
5. Button Lock:
This is useful if you want to disable the
transmission function of the remote control temporarily to
prevent from any inadvertent pressing of buttons by others.
Press the
button first, within 3 seconds press and hold
( )
button for 2 seconds to activate or cancel the button
lock function, the
icon will displayed on the LCD screen to
show the LCD remote transmitter is on "Button Lock"
7
Advertisement
Table of Contents
