Page 1
C3-RS-665-2W PROFESSIONAL TWO WAY REMOTE CAR STARTER & 3 CHANNEL SECURITY SYSTEM OPERATIONS MANUAL Compatible Please register your product at: www.autopageusa.com THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY...
SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3.
Switching code For 2nd Car For regular remote transmitter Only Operation. XT-43 LCD TRANSMITTER OPERATION: LCD REMOTE CONTROL TRANSMITTER: Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low output powered frequency.
times when the battery compartment is empty, and then insert the new battery. THE REMOTE LCD ICONS WITH FUNCTION: Door Lock Door Unlock Your vehicle Your vehicle doors are doors are unlocked locked. Start Mode Valet Mode Your vehicle is running All the function shall be temporarily on hold.
Page 5
one long beep is heard. LCD Programming has now been entered. Transceiver Button System Function Remark Switching code for 2nd / 1st Press within 5 Program Mode - Car Operation seconds Melody / Vibration Mode Press within 5 Program Mode - seconds Power Save Mode Press within 5...
Page 6
1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. LCD Programming has now been entered. 2. Within 5 seconds press and hold button until two beeping sounds are heard and the “II” icon will display on the LCD screen to indicate the second transceiver pin code has been initiated.
exited. Power Save Mode: While in the power save mode, the LCD remote transceiver will “sleep” until a button is pushed. This will extend the life of battery. When power save mode is “ON”, the remote control will wake up periodically to check for messages from the security module.
While triggering the alarm the LCD screen will alert the user through melody sound and flashing trigger icon. Press any button on the LCD remote transmitter to stop the melody sound. PANIC FUNCTION: (IF SIREN or HORN IS INSTALLED) The transmitter can be used as a remote panic switch to manually trigger the vehicle’s horn in case of emergency.
Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. TEMPORARY STOP FEATURE: This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the engine running and the climate control on.
SILENT ARMING / DISARMING: Pressing the buttons together on the transmitter will arm or disarm your system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only. DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
return to normal status. ACTIVE UNLOCK & DISARMING: 1. Press button on the transmitter. 2. The siren will chirp twice and parking light will flash twice to indicating that the security system is now disarmed. The vehicle doors will unlock and dome lights will turn on for 30 seconds. TAMPER DISARMING: If the alarm was triggered in your absence, upon disarming the system, the siren will chirp 4 times, the parking lights will flash 3 times.
indicating the system has exited the valet mode. PANIC FUNCTION: The transmitter can be used as a remote panic switch to manually trigger the vehicle’s siren / horn in case of emergency. 1.Press and hold the button for 3 second. The siren / horn will immediately sound.
is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”. TRUNK RELEASE Press and hold the button on transmitter for two seconds to remote control the trunk release or other electric devices. CAR LOCATOR Press the button once with armed mode to active car locator function.
(SAFETY START OPERATION:) The safety start feature allows you to press the button Twice before the vehicle will remote start or remote shut down. NOTE: The Remote Start Unit will not start the vehicle i f any one of the following conditions exists: 1.
IMPORTANT: Timer Start should be used only in open areas, Never start and run the vehicle in on enclosed space as a garage or carport. 3 hours timer start: This feature is design for an extreme cold climate usage. The system will auto start the vehicle every 3 hours, to prevent engine freezing and hard to start.
Page 17
After one (1) year, the purchaser should ship the unit prepaid to Auto Page with a money order in the amount of $30.00 to cover shipping and handling charges.
Page 18
Auto Page shall not be liable, under the foregoing WARRANTIES or otherwise, for: Any personal injury of any kind to the purchaser, its employees or agents or anyone else whomsoever resulting directly or indirectly from the use or presence of the equipment or parts;...
Page 19
serious threat to human health and water resources.“Perchlorate Material – Special handling may apply.” For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/...
Page 20
960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.com...