Related Manuals for Auto Page RF-520LCD
Summary of Contents for Auto Page RF-520LCD
- Page 1 RF-520LCD 2-WAY AM/AM LCD COMMUNICATION PROFESSIONAL VEHICLE SECURITY SYSTEM OPERATIONS MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction Changing Battery XT-72S Standard Transmitter Remote Transmitter Operation LCD Transmitter Operation Button Lock LCD Transmitter LED Display Chirp Indicators Parking Light Flashes Alarm Operation Condition Active Arming Ajar Warning Silent Arming Shock Sensor By-pass Hidden Alarm Passive Arming Passive Arming By-pass Active Disarming... -
Page 3: Introduction
RF520. Auto Page, Inc. has over 25 years of experience in the vehicle security industry in the United States and is a wholly owned subsidiary of Iwata Electric Co., of Tokyo, Japan. -
Page 4: Remote Transmitter Operation
WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. -
Page 5: Lcd Transmitter Operation
LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button System Function System’s Trigger Check System’s Status Check (1 second) LCD screen lamp turns on for 5 seconds. Clear the Flash Icon and Melody Sound on the LCD Screen Transmitter Switching code for 2nd / 1st (2 sec) Car Operation BUTTON LOCK:... -
Page 6: Alarm Operation Condition
ALARM OPERATING CONDITION: Siren / Parking Horn Light 1 or 3 1. Arming 1 Flash Chirps 2 or 4 2 or 3 2. Disarming Chirps Flashes 3. Trigger Alarming Flashes 4. Panic Alarming Flashes 5. Car Locator 6 Chirps 12 Flashes ACTIVE ARMING –... -
Page 7: Passive Arming
PASSIVE ARMING Active arming / disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows. -
Page 8: Step Unlock
TWO STEPS DOOR UNLOCK: This feature will independently unlock the driver’s door only when disarming the security system. Pushing the within 3 seconds will unlock the other doors. AUTOMATIC RE-ARM : If this feature is selected, the security system will automatically re-arm itself in 60 seconds after disarming with remote transmitter. -
Page 9: Trigger The System
TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impact will trigger the warn-away signal. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cranking. -
Page 10: System Status Check
SYSTEM’S STATUS CHECK (For two-way transceiver operation only) When you want to check the system’s present status through the LCD screen, Press the transceiver button twice, within 3 seconds press (C) button. It responds with one melody sound, the LCD screen should be illuminated. Note: If it has no responds then you are out of range. -
Page 11: Channel 5 Auxiliary Control
CHANNEL 5 AUXILIARY CONTROL OUTPUT (Available Option) Press the transmitter button to active Channel 5 function. Channel 5 is a programmable output. This feature, when installed with optional accessories, may be used to operate power windows, sunroofs, etc. from your remote transmitter. CHANNEL 6 AUXILIARY CONTROL OUTPUT (Available Option) Press the transmitter button to active Channel 6 function. -
Page 12: Lcd Remote Control
LCD REMOTE CONTROL TRANSCEIVER Note: If the system is interfered by stronger radio BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a icon shall be displayed on the LCD screen. When the old battery is replaced to new one, there will be beep sounds indicate the power is up and the clock on the LCD screen returns to AM12:00 after displaying all the icons. -
Page 13: Programming Lcd Transmitter
Door Open Warning Doors are illegally opened (Zone 3) Shock Sensor Trigger Trigger on Shock Sensor (Zone 4) Time Monitor Count Down Timer Reminder when time is up for parking Vibration Mode Remote Control vibrates when the system is triggered Driver paging Someone is paging you in front of your vehicle... - Page 14 Screen Lamp ON: Press and hold the one melody sound and the LCD screen lamp will turns on for 5 sec. Power Save Mode: While the power save mode, the LCD remote transceiver uses “0” current to save the battery power. Entry: Press &...
-
Page 15: Timer Setting
Set Up Fixed Count Down Timer: 1. Press the button first, within 3 seconds press and hold the two seconds, the LCD screen will shows 2. Press the ) button again showing next order time on the screen ( ie.0:20), press them again (ie.0:30)…..and so on. - Page 16 Timer Setting: Example to AM10:30 Press & hold the button for 3 seconds, with two-melody sound and the “Hours” digit flashes for adjusting. Press the button to decrease or increase the “Hour” digit until AM10: xx Press the button once again then the “Minute” digit flashes for adjusting. Press the button to decrease or increase the “Minutes”...
-
Page 17: Autopage Warranty
IMPORTANT NOTE: Any damages to the alarm system resulting from an installation performed by anyone other than a professional installation technician authorized by a dealer of Auto Page will void the product’s warranty. The purchaser’s remedies under this WARRANTY shall be limited to the repair or replacement of electronic components only. - Page 18 This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD, which must have complete information to receive warranty service. Please keep this card in a secured place . AUTOPAGE WARRANTY SERVICE CARD ______________ Model: Serial # _______________...
- Page 19 1815 West 205 Street Suite 101 Torrance, California 90501-1525 Main Office: 310-618-2002 Customer Service: 800-262-2527 Ext. 462 www.autopageusa.com...