Table of Contents
Advertisement
Note: If the brake pedal is pressed before the key is in the ON position, the engine will
shut down.
C. TEMPORARY STOP FEATURE:
This feature allows the vehicle to remain running after the key has been removed from
the ignition. This feature is useful for occasions when you wish to exit and lock the
vehicle for short periods of time, but would like to leave the motor running and the
climate control on.
1.Before turning off the engine, press the
button once on the transmitter and the
LED indicator will flash 3 times to confirm enter.
2.Turn the ignition key to OFF position. (The engine will stay running.)
3.The engine will run until the pre-programmed time elapsed or shutdown input is
received.
D. TURBO CHARGE MODE:
Turbo charge mode keeps the engine running after arriving at you destination for a
programmable period of 1, 3 or 5 minutes, This allows the vehicle's engine time to
conveniently cool down the turbo after you have left the vehicle. To activate:
1. While the engine is running, pull up the hand brake and place the transmission gear
in the park position.
2. Before turning off the engine, press and release
and
buttons at the same
time.
-- The LED will flash indicating the remote start has entered the turbo charge mode.
3. Take the "Ignition Key" from the key cylinder.
-- Engine keeps running. --
4. Exit and secure the vehicle.
-- Engine continues running until the pre-programmed time elapsed. --
NOTE: This feature only applies to vehicles with Turbo Engines.
E. TIMER START:
This unit can be programmed to start and run the engine every 3 hours or punctually at
the same time next morning, the engine will run for the programmed running time and
then shut down.
IMPORTANT: Timer Start should be used only in open areas, never start and run the
vehicle in on enclosed space as a garage or carport.
Daily Timer Start: The feature is very useful for the driver who wants to run the
vehicle punctually at the same time next morning. Before set-up of the "Daily Timer
Start", you should set you time for engine start.( see Timer Setting / Timer set-up for
"Daily Timer Start, page 21)
ENTER:
1. Press the
button once to remote start the vehicle. As soon as the vehicle is
running and the parking lights have turned on or are flashing.
2. Immediately depress the
button once, within 2 seconds
3-a. 3 Hours Timer Start: Rapidly depresses the
button (or depresses
+
buttons, if you program
+
buttons = Start / Stop button.) The parking light will
flash (3) times. The siren or horn chirps (3) times. The vehicle is now programmed to
start every 3 hours.
3-b. Daily Timer Start: Depress the transmitter
button
first, within 3 seconds press
(
) button. The parking
light will flash (6) times. The siren chirps (6) times. The
vehicle is now programmed to start at the real time of the
next day. Your set time for the next day engine start flashes
for approx. 3 seconds on the LCD screen. After 3 seconds
the
icon stays displayed on the LCD screen.
20
Advertisement
Table of Contents
