Display Assembly - HP mt43 Maintenance And Service Manual

Display assembly

Description
Display panel assembly
NOTE: Display assemblies are spared at the subcomponent level only. For spare part information, see
Display assembly subcomponents on page
Before removing the display assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the internal base plate (see
Remove the display assembly:
1. Disconnect the display cable from the system board.
2. Remove the 3 Phillips M2.5×5.0 screws (1) from the display hinges.
17.
Bottom cover on page
Battery on page 30).
Internal base plate on page
25).
42)
Component replacement procedures
Spare part number
not spared
53