HP mt43 Maintenance And Service Manual page 66

7. If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips M2.0×2.0 screws
that secure the panel to the display enclosure, and then rotate the display panel over onto the keyboard
(2).
The raw display panel is available using spare part number 818272-002.
8. On the back of the display panel, lift the tape from atop the connector (1), and then disconnect the
display cable from the rear of the panel (2).
9. Remove the display panel from the enclosure (3).
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts