System Board - HP mt43 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows operating system
Description
System board with AMD PRO A8-9600U processor
Before removing the system board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the keyboard (see
7. Remove the internal base plate (see
When replacing the system board, be sure to remove the following components (as needed) from the
defective system board and install on the replacement system board:
● Solid-state drive (see
Memory modules (see
●
● WLAN/Bluetooth module (see
● WWAN module (see
● Heat sink/fan assembly (see
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Speaker cable
(2) Display cable
(3) Power button board cable
(4) USB/audio board cable
(5) Card reader cable
50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 30).
Keyboard on page
Internal base plate on page 42
Solid-state drive (SSD) on page
Memory modules on page
WLAN/Bluetooth combo card on page
WWAN module on page 36)
Heat sink/fan assembly on page
25).
39).
31)
32)
34)
45)
Spare part number
917765-301