Configure The Settings Relating To Audio [Audio] - Panasonic WV-X6531N Operating Instructions Manual

2.5.6 Configure the settings relating to audio [Audio]

Click the [Audio] tab on the "Image/Audio" page. (®For menu display and how to operate, refer to page 47,
page 48)
The settings relating to audio can be configured on this page.
Note
•
Images and audio will not be synchronized. Therefore, images and audio may not always match.
•
Audio may be interrupted depending on the network environment.
Mic input
[Mic input volume]
Set the audio volume for input into the camera. This setting is reflected in the volume when listening to audio
on a PC (mic input to PC), and in the volume during "Audio recording" or during "Audio detection".
•
Mic High/Mic Middle/Mic Low: Set the volume when audio is input to the camera using a microphone.
•
Line High/Line Middle/Line Low: Set the volume when audio is input to the camera using line input.
•
Default: Mic Middle
[AGC (audio)]
Automatically adjusts the audio reception to a suitable volume. The degree to which the volume is adjusted
can be selected from High/Middle/Low.
When "High" is selected, it is easier to hear quiet sounds, but sounds may be heard as noise. If you do not
want to hear noise, select "Middle" or "Low". These settings are linked with the volume settings of the "Audio
recording" and "Audio detection".
•
Default: High
2 Settings
Operating Instructions 143