How To Configure Https Settings - Panasonic WV-X6531N Operating Instructions Manual

2 Settings

2.9.3 How to configure HTTPS settings

The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to cameras on this page.
HTTPS settings can be configured by either using the certificate pre-installed to the camera, or using a CA
certificate that you obtained by yourself from the CA (CA: Certification Authority). The settings will be configured
in the following procedure.
When using a pre-installed certificate:
When a pre-installed certificate is selected
Obtain the root certificate
Access a camera using HTTPS
When a pre-installed certificate is
selected
(®page 215)
204 Operating Instructions
(®page 205)
Configure HTTPS connections
When using a CA certificate:
When a CA certificate is
Generate CSR (Certificate Signing Request)
Apply for the approval and the issue of CA
Install the CA certificate
(®page 211)
Access a camera using HTTPS
When a CA certificate is
selected
(®page 88)
certificate by CA
(®page 88)
(®page 214)
selected
(®page 220)