Configure The Qos Settings - Panasonic WV-X6531N Operating Instructions Manual

2 Settings
[SNMPv3] - [Password]
Select the SNMPv3 encryption method from DES or AES.
•
Available number of characters:
•
If the authentication method is MD5: Empty field or 8-16 characters
•
If the authentication method is SHA1: Empty field or 8-20 characters
•
Unavailable characters: " &
[System name]
Enter a system name to be used to manage the camera with the SNMP function.
•
Available number of characters: 0 - 32 characters
•
Default: None (blank)
[Location]
Enter the name of the location where the camera is installed.
•
Available number of characters: 0 - 32 characters
•
Default: None (blank)
[Contact]
Enter the E-mail address or the phone number of the SNMP manager.
•
Available number of characters: 0 - 32 characters
•
Default: None (blank)

2.9.2.8 Configure the QoS settings

The settings relating to the Diffserv function and shaping of stream are configured in this section.
Diffserv
The Diffserv function can be used to set the priority of image/audio data sent from routers.
The priority set to this function must match the DSCP value configured to the router.
When using the Diffserv function, contact the network administrator.
[Image DSCP 0-63 ]
Enter the packet priority for video data.
•
Available values: 0 - 63
•
Default: 0
202 Operating Instructions