IBM 5256-1 Maintenance Information Manual page 175

c. Press the Start switch. The Ready light turns
on and the print head moves into position to
start printing. All four of the lights on the left
side of the control panel should now be on.
Power
.on
UOff
•
power
On
• Ready
1
e
Line
sYnc
Line
Stop Start Feed
B B B
2
•
System
Available
Form
Feed
B
When step 19 is completed successfully, your printer is
properly set up and communicating with the system.
Refer to Chapter 1. Introduction in the IBM 5256 Printer
Operator's Guide, GA21-9260, for further information.
If step 19 is not successful, refer to Problem Check List
on the next page.
A-10