IBM 5256-1 Maintenance Information Manual page 168

o
6. To place the forms tractor in position on the
top of the printer, use the following steps:
a. Be sure that the cut forms guide is turned back
as shown.
b. Insert the back legs of the' forms tractor in the
back cover slots.
c. Press down firmly until the back legs snap into
place. Pivot the forms tractor toward the front
of the printer until the front legs move into
locking position.
07.
d. Check the final placement by making sure the
Paper Advance knobs turn freely and the tractor
pins move.
To insert forms into the printer, use the
following steps:
a. If your printer has a forms stand, place the
stand on the floor behind the printer. A box of
forms can be placed under the forms stand
shelf.
Forms
Stand
Shelf for
completed
forms
Box of
paper
forms
Appendix 5256 MIM A-3
Appendix,
Index