Activating Pin Code; Using The Obelisk Top2 Memory Card; Type Of Control; Wall Compensation - Theben RAMSES 366/1 top2 Operating Instructions Manual

Activating PIN code

The PIN code is set in OPTIONS via the menu.
L If you have forgotten your PIN, call the Theben Hotline.
L Have the serial number ready.
MENU
OPTIONS
EXT INPUT
LANGUAGE
u
PIN NO PIN
WITH PIN
FACTORY
SETTINGS
INFO
END

Type of control

In the submenu TYPE OF CONTROL, the following settings can
be selected:
•
NORMAL (e.g. radiator/convector)
•
UNDERFLOOR (inertial heating systems)
•
AIR HEATING (fast heating systems)
•
HYSTERESIS CONTROLLER (adjustable switch on/off
hysteresis of ± 0.2 - 2.0 °C in 0.2 increments)
Thus, the control behaviour can be adjusted to different types
of heating
MENU
OPTIONS
EXT INPUT
TYPE OF NORMAL
u
CONTROL
UNDERFLOOR
AIR HEATING
HYSTERESIS
CONTROLLER
Press MENU, use u to select TYPE OF CONTROL and follow
† ¾
the indications on the display.

Wall compensation

If the installation location is unfavourable, this may lead to
variations in temperature between the detected and actual
room temperature (+ if indication too low, – if indication too
high). This can be corrected by using wall compensation.
Press MENU, use u to select WALL COMP and follow the
†
¾
indications on the display.
u CURRENT
PIN
NEW PIN
00 00
MENU
OPTIONS
EXT INPUT
TYPE OF
CONTROL
WALL COMP u
WALL COMP
0.2 °C

Using the OBELISK top2 memory card

Insert memory card in the clock thermostat
† ¾
Read in/out saved switching times and device setups in
† ¾
the time switch or start Obelisk program
Remove memory card after copying etc.
†
¾
!
Avoid mechanical overload and contamination during
storage/transport
Copying OBELISK → TIME
This copies the switching program and optionally all time
switch settings (e.g. external input, time format etc.) from the
memory card in the clock thermostat.
Copying TIME →OBELISK
This copies all switch programmes and settings from the clock
thermostat to the memory card.
Starting OBELISK program
Takes on the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the clock thermostat are re-activated.
OBELISK
COPY
u u
COPY
RAMSES ->
OBELISK ->
OBELISK
RAMSES
OVERWRITE OVERWRITE
OK OK
u
RUN CHECK
OBELISK OBELISK
5