Omron NJ501-1400 User Manual page 388

Appendices
Specifications When Not Using the Sysmac Studio Version That
Corresponds to the Unit Version of the CPU Unit
The specifications when you do not use the Sysmac Studio version that corresponds to the unit version
of the CPU Unit are given in this section.
 Using an Lower Sysmac Studio Version
If you use a lower version of the Sysmac Studio, you can use only the functions of the unit version of
the CPU Unit that corresponds to the Sysmac Studio version.
Example: Unit version of CPU Unit: 1.04
Sysmac Studio version: 1.04
Unit version 1.03 of the CPU Unit corresponds to Sysmac Studio version 1.04. There-
fore, you can use only the functions that are supported by unit version 1.03 of the CPU
Unit. You cannot use functionality that was added for unit version 1.04 or later of the
CPU Unit.
 Using a CPU Unit with an Earlier Unit Version
If you use a CPU Unit with an earlier version, select the unit version of the connected CPU Unit or
an earlier unit version in the Select Device Area of the Project Properties Dialog Box on the Sysmac
Studio. You can use only the functions that are supported by the unit version of the connected CPU
Unit.
Example:
Precautions for Correct Use Precautions for Correct Use
An error will occur if you perform the following type of operation.
• Create a project on Sysmac Studio version 1.02 or higher with unit version 1.01 or later
selected as the version in the Select Device Area of the Project Properties Dialog Box.
• Upload the project to Sysmac Studio version 1.01.
A-104
Unit version of CPU Unit: 1.03
Sysmac Studio version: 1.05
Unit version 1.04 of the CPU Unit corresponds to Sysmac Studio version 1.05. How-
ever, the connected CPU Unit is unit version 1.03, so select version 1.03 or earlier as
the version in the Select Device Area of the Project Properties Dialog Box. If you select
version 1.03 as the version in the Select Device Area of the Project Properties Dialog
Box, you can use only the functions that are supported by unit version 1.03 of the CPU
Unit. You cannot use functionality that was added for unit version 1.04 or later of the
CPU Unit.
NJ-series CPU Unit Hardware User's Manual (W500)