Omron NJ501-1400 User Manual page 265

Event name User Program/Controller Configurations and Setup Down-
loaded
Meaning The user program and the Controller configurations and setup were downloaded.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The user program and the Controller
configurations and setup were down-
loaded.
Attached Attached Information 1: Connection method
information
Attached Information 2: Connecting IP address, Connection through proxy: Proxy IP address
Attached information 3: Device Output Hold Status
Precautions/ None
Remarks
* This event code occurs for unit version 1.10 or later of the CPU Unit.
Event name Online Edits Transferred
Meaning The user program was edited online.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The user program was edited online
and the edits were transferred to the
Controller.
Attached Attached Information 1: Connection method
information
Attached Information 2: Connecting IP address, Connection through proxy: Proxy IP address
Precautions/ None
Remarks
* This event code occurs for unit version 1.10 or later of the CPU Unit.
NJ-series CPU Unit Hardware User's Manual (W500)
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
1: Direct USB connection
2: Direct Ethernet connection
3: Remote USB connection or Ethernet hub connection
(When attached information 1 is 2 or 3)
1: Retained.
2: Not retained.
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
1: Direct USB connection
2: Direct Ethernet connection
3: Remote USB connection or Ethernet hub connection
(When attached information 1 is 2 or 3)
5 Troubleshooting
Event code 90050000 hex*
None Detection
timing
--- Log category
Operation starts according to the user program and the
Controller setup data that were downloaded.
Name
---
Prevention
---
Event code 90070000 hex*
None Detection
timing
--- Log category
Operation is performed according to the changed user
program.
Name
---
Prevention
---
During user pro-
gram/Controller
configurations
and setup down-
load
Access
5
When transfer-
ring online edits
is started
Access
5-85