JVC XV-N510B Service Manual page 12

Dvd audio/video player

Hide thumbs Also See for XV-N510B:

Table of Contents

3.2.2 Removing the traverse mechanism assembly (See Figure 7)

(1) Reverse the loading mechanism assembly.

(2) A card wire is removed from a wire bracket.

(3) Remove the four screws B attaching the traverse mecha-

nism assembly. Remove the traverse mechanism assem-

bly upward.

3.2.3 Removing the elevator (See Figure 8 and Figure 9)

• Prior to the following procedure, remove the traverse mecha-

nism assembly.

(1) Remove the two arms of the elevator from the two parts f

by moving the arms in a direction of the arrow.

(2) Pull out the elevator in a rear direction.

Attaching the elevator:

Engage the two holes g to the two shafts on the front part of

the elevator. And then, attach the elevator.

1-12 (No.YD016)

Loading mechanism assembly

Traverse mechanism assembly

Fig.7

Part f

Fig.8

Elevator

Shaft

Fig.9

wire

bracket

Elevator

Part f

Slide cam

Table of Contents

Xv-n512s