Figure 5-7 Radius Server: Add Allowed Network Address; Table 5-6 Radius Server: Add Allowed Network Address - ZyXEL Communications Vantage RADIUS 50 User Manual

Vantage RADIUS User's Guide
5.6.3 Insert/Modify Allowed Network Range
This screen allows you to specify a network range in which an AP is allowed to communicate with Vantage
RADIUS. You need to know the WEP key or shared secret used with your wireless APs in the network
range to configure this screen.
If you enabled Allow Any IP Address in the preceding RADIUS SERVER screen, you do not need to
configure allowed IP addresses.
Click RADIUS and then RADIUS SERVER in the main menu. Now click the Add button in the Allowed
Network IP Address section or click Modify next to an entry you want to change. The following screen
displays.

Figure 5-7 RADIUS Server: Add Allowed Network Address

Table 5-6 RADIUS Server: Add Allowed Network Address

LABEL
Allowed Network Address
Network Address
Netmask
5-14
Type the first address in your network. This is the start address from which
Vantage RADIUS uses the Netmask to allow access from many APs.
This field displays subnet mask used to specify the network range limits for
accepted IP addresses.
DESCRIPTION
RADIUS Configuration