ZyXEL Communications Vantage RADIUS 50 User Manual page 76

Vantage RADIUS User's Guide
LABEL
Action
Delete
Server Port
Authentication Port
Accounting Port
Allowed Access Type
Allow Any IP Address
Shared Secret
Allowed Specified IP
Address/Network
Address
Apply
Allowed IP Address (max 20)
Add
No.
IP Address
Shared Secret
Description
Action
Delete
5-10
Table 5-3 RADIUS Server Settings
Click the Modify button in this field to edit information about a remote RADIUS
server.
Select the check box next to the remote RADIUS server description in this list that
you want to delete, then click Delete to remove this entry.
Enter the port number of the authentication server. The default port number is
1812.
Make sure your AP uses the same port number.
Enter the port number of the accounting server. The default port number is 1813.
Make sure your AP uses the same port number.
Enable this field to have Vantage RADIUS accept connections from all incoming
IP addresses using the shared secret below.
Type a password as the key to be shared.
The key must be the same on Vantage RADIUS and your AP. The key is not sent
over the network.
Enable this field to allow specified IP addresses of AP's or network addresses in
this list to access Vantage RADIUS.
Click this button to save your configurations back to Vantage RADIUS.
Click this button to add an IP address of an AP to the Allowed IP Address list.
This field displays the index number of allowed IP address entries in the list.
This field displays the IP address of an AP allowed to access Vantage RADIUS.
This field displays the key used to connect to your wireless AP.
This field displays the description entered in the Allowed IP Address screen to
identify your wireless AP.
Click the Modify button in this field to edit the information required to access your
AP.
Select the check box next to the AP(s) description in this list that you want to
delete, then click Delete to remove this entry.
DESCRIPTION
RADIUS Configuration