Chain And Sprocket Wear Inspection - Triumph Street Twin Owner's Handbook Manual

Tighten both adjuster lock nuts to
20 Nm and the rear wheel spindle nut to
110 Nm.
Repeat the chain adjustment check.
Readjust if necessary.
Warning
Operation of the
insecure adjuster lock nuts or a loose
wheel spindle may result in impaired
stability and
motorcycle. This impaired stability and
handling may lead to loss of control or
an accident.
Check the rear brake effectiveness.
Rectify if necessary.
Warning
It is dangerous
motorcycle with defective brakes; you
must have your authorised Triumph
dealer take remedial action before you
attempt to ride the motorcycle again.
Failure to take remedial action may
reduce braking efficiency leading to
loss of motorcycle control or an
accident.
motorcycle with
handling of
to operate
Maintenance And Adjustment

Chain and Sprocket Wear Inspection

Never neglect chain maintenance and
always have chains installed by an
authorised
genuine Triumph supplied chain as
specified
Catalogue.
The use of non‑approved chains may
the
result in a broken chain or may cause
the chain to jump off the sprockets
leading to loss of motorcycle control or
an accident.
If the sprockets are found to be worn,
always replace the sprockets and drive
chain together.
the
Replacing worn sprockets without also
replacing
premature wear of the new sprockets.
1. Measure across 20 links
2. Weight
Warning
Triumph dealer.
in the Triumph
Caution
the chain will
1
Use a
Parts
lead to
10-20
KG
2
101