Daily Safety Checks - Triumph Street Twin Owner's Handbook Manual

General Information

Daily Safety Checks

Warning
Failure to perform these checks every
day before you ride may result in
serious motorcycle damage or an
accident causing serious injury or
death.
Check the following items each day
before you ride. The time required is
minimal, and these checks will help
ensure a safe, reliable ride.
If any irregularities are found during
these checks, refer to the Maintenance
and Adjustment section or see your
authorised Triumph dealer for the action
required to return the motorcycle to a
safe operating condition.
Check:
Fuel: Adequate supply in tank, no fuel
leaks (see page 57).
Engine Oil: Correct level on dipstick or
shown in sight glass. Add correct
specification oil as required. No leaks
from the engine or oil cooler (see
page 90).
Drive Chain: Correct adjustment (see
page 99).
Tyres/Wheels:
pressures (when cold). Tread depth/
wear, tyre/wheel damage, loose/broken
spokes, punctures etc. (see page 118).
68
Correct inflation
Nuts, Bolts, Fasteners: Visually check
that steering
components, axles, and all controls are
properly tightened or fastened. Inspect
all areas for loose/damaged fixings.
Steering Action: Smooth but not loose
from lock to lock. No binding of any of
the control cables (see page 110).
Brakes: Pull the brake lever and push
the brake pedal to check for correct
resistance. Investigate any lever/pedal
where the travel is excessive before
meeting resistance, or if either control
feels spongy in operation (see page 103).
Brake Pads: Check that the correct
amount of friction material is remaining
on all the brake pads (see page 103).
Brake Fluid Levels: No brake fluid
leakage. Brake fluid levels must be
between the MAX and MIN marks on
both reservoirs (see page 104).
Front Forks: Smooth action. No fork oil
leakage (see page 112).
Throttle: Make sure that the throttle
grip returns to the idle position without
sticking (see page 97).
Clutch: Smooth operation and correct
cable free play (see page 98).
Coolant: No coolant leakage. Check the
coolant level in the expansion tank
(when the engine is cold) (see page 95).
Electrical Equipment: All lights and horn
function correctly (see page 50).
Engine Stop: Engine start/stop switch
turns the engine OFF when the switch is
moved to the
page 48).
Stands: Returns to the fully up position
by spring tension. Return springs not
weak or damaged (see page 58).
and suspension
STOP position (see