Steam, Combi And Hot Air; Setting New Values; Possible Actions During Cooking - Electrolux CS 7 Product Description

Steam, Combi and Hot air

Choose cooking mode:
Press "Steam" , "Combi" or "Hot air"
The LED lights.
Steam Combi

Setting new values

Press "Oven temperature",
or
"Meat temperature"
(core temperature)
When the button's LED lights,
it is activated for setting.
The last setting flashes
on the display for 5 seconds.
Set the new value using
the "Setting knob" when
the button's LED comes on.
Choose the steam level*
between 1-5
NOTE! The oven temperature cannot be set lower than 5°C above the set core temperature.

Possible actions during cooking

Cancel cooking:
Press "Stop"
NOTE!
Settings are NOT
cancelled when the door
is opened during cooking.
* Applies to Combi (Hot air/Steam), Reheating Gourmet and le Chef.
1 0
The last set oven temperature, time or core temperature
flashes for 5 sec.
The LED indicates the previous steam level.*
xx
Hot air
Press "Start" to select the pre-set values.
Start
Press "Start"
"Time"
The LED lights.
The displays show:
- Actual oven temperature
- Remaining cooking time
or
- Actual core temperature
Check or change the oven temperature and time
or core temperature
Press the actual button
For 5 seconds flash
xx
set Oven temperature
and
xx
remaining Time
or
xx
set Core temperature
or
xx
set Oven temperature
If correction of "flashing" values will be done:
Set the new value using the "Setting knob"
when the button's LED is lit
xx
Water injection can be chosen
during cooking in the Hot air mode.
See Water injection
Changing the steam level*:
Choose the new steam level
between 1-5.
.
xx
Cooking finished
When cooking is finished:
The buzzer sounds.
LED goes out.
Cooking stops.
Time display flashes.
Press "Stop"
or
Open the door.
The buzzer stops and
the actual oven temperature
and the time setting or
the actual core temperature
are shown on the displays.